File:Popov lightning detector circuit diagram.png

From Gnomon Chronicles
Jump to navigation Jump to search

Original file(1,918 × 1,699 pixels, file size: 28 KB, MIME type: image/png)

Nonfiction: In [[Popov's lightning detector the coherer (C) was connected to an antenna (A), and to a separate circuit with a relay (R) and battery (V) which operated an electric bell (B). The radio noise generated by a lightning strike turned on the coherer, the current from the battery was applied to the relay, closing its contacts, which applied current to the electromagnet (E) of the bell, pulling the arm over to ring the bell. Popov added an innovative automatic reset feature of a "self tapping" coherer where the bell arm would spring back and tap the coherer, restoring it to its receptive state.[3] The two chokes (L) in the coherer's leads prevented the radio signal across the coherer from short circuiting by passing through the DC circuit. He connected his receiver to a wire antenna (A) suspended high in the air and to a ground (earth) (G). The antenna idea may have been based on a lightning rod and was an early use of a monopole wire aerial.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current19:58, 13 January 2020Thumbnail for version as of 19:58, 13 January 20201,918 × 1,699 (28 KB)Admin (talk | contribs)Nonfiction: In [[Popov's lightning detector the coherer (C) was connected to an antenna (A), and to a separate circuit with a relay (R) and battery (V) which operated an electric bell (B). The radio noise ge...

There are no pages that use this file.

Metadata